Code2410070
Operation Code: 2410070
Standard Labor Map: Brake Fluid Flush
About This Operation Code
When you see 2410070 on your mechanic's quote or invoice, it refers to the standardized automotive industry code for Brake Fluid Flush. Mechanical shops use these codes to lookup predefined labor times (guided by Alldata or Mitchell 1).
Flushing replaces old, moisture-contaminated brake fluid with fresh fluid to maintain stopping power.
⏱️
Standardized Labor
Shop labor rates range from $120–$250/hour depending on your city. Using 2410070 prevents a mechanic from charging "made up" times.
Average Total Cost (Labor + Parts)
~$70-$120 for complete system flush
*Based on 2026 national averages for brake fluid flush.
View Full Pricing Guide →⚠️ Beware Overlap Labor
Dishonest shops often double-dip labor when billing multiple Op Codes. For example, if parts must be removed to access Brake Fluid Flush, they shouldn't bill full Book Time for both codes.
Overly frequent brake fluid changes sold (manufacturer usually says every 2-3 years or when moisture % is high, but some shops push it every oil change); using a simple brake bleed as an opportunity to charge for a full “flush” with expensive fluid; not actually performing a full flush despite charging for it.
Scan Quote for Overlap →